Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8
Appendix
8.1
Copyright
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
Subject to technical changes without notice.
8.2
Terminology/Glossary
Term
Headstock
Lead- screw nut
Lathe chuck
Drill chuck
Bed slide
Cross slide
Top slide
Taper mandrel
Tool
Workpiece
Tailstock
Rest
Lathe dog
Threading gauge
Appendix
Version 1.0.3 - 2020-11-2
Explanation
Housing for the feed gear and the synchronous belt pulleys.
Split nut which engages the lead screw.
Clamping tool for holding the workpiece.
Drill bit adapter
Slide on the slideway of the machine bed which feeds parallel to
the tool axis.
Slide on the slideway of the machine bed which feeds parallel to
the tool axis.
Swivelling slide on the cross slide.
Taper of the drill bit, the drill chuck or the centering point.
Lathe tool, drill bit, etc.
Piece to be turned or machined.
Movable turning aid.
Follow or steady support for turning long workpieces.
Device or clamping aid for driving pieces to be turned between
centres.
Help with thread cutting
Translation of original instruction
TH5615 | TH5620 | TH5630
EN
165
Werbung
Inhaltsverzeichnis
