Dürkopp Adler 577-1111 Bedienungsanleitung Seite 123

22
Parameter list on the operator level
Parameter Denomination
F - 000 Buttonhole counting On/Off
(This function is only possible
when the machine speed display,
Parameter "F - 139", is switched
off)
F - 001 Reset buttonhole counting
F - 020 Adjustment aid for the knife and for
the thread cutter, connected me-
chanically with the sewing cage.
The following functions are en-
abled only when the needle stands
in its upper position and the se-
wing cage in its rear position .
Key "+"
Key 3
Key 3
Key 4
Key 4
Only one function at a time can be
controlled!
F - 080 Correction (+) of the after-running
stitches at the buttonhole end
F - 081 Correction (-) of the after-running
stitches at the buttonhole end
F - 085 Number of buttonholes for the
hook thread monitor
"F - 195" to "1...4"
on
right arrow On
Sewing cage in upper
position
right arrow Off
Sewing cage in lower
position
right arrow On
Knife On
right arrow Off
Knife Off
Adjustment
max min Standard
on oFF oFF
on oFF oFF
on oFF oFF
10 0 0
10 0 0
3000 0 0