Leister Costa Bedienungsanleitung Seite 53

Hem / Piping assembly
Upper hem / piping guide
The assembly may only be carried out when the system is cold
(see section 1.7, Cooling).
The heating element tube (26) must be in the waiting position (see section
on welding nozzle position).
Turn off main switch (3)
OFF
230
Disconnect power supply cord (1) form the line/mains.
400
Pin position
Thread insert
• Guide plate, lower
– Insert fastening screw into the thread insert with approx. two turns (Abb. A).
– Insert pin on the guide plate into the pin position and slide onto fastening screw (Abb. B)
– Tighten fastening screw (Abb. C)
(Fig. A)
Guide plate, lower
Fastening for upper hem / piping guide
Fastening for lower guide plate
(Fig. B)
Fastening Clamp
Thread insert
Pin position
(Fig. C)
Welding nozzle
26
53