Dometic TEC60 Bedienungsanleitung Seite 43

TEC60
9.4 Changing the oil (fig. 6, page 4)
!
CAUTION!
Hot oil can cause burns.
A
NOTICE!
Only dispose of used oil at a specialist recycling station and ob-
serve the local laws for environmental protection.
You may use the following oil:
 SAE 5W-30 grade oil (can be used at any temperature).
 Oil with single grade oil viscosity.
Select the appropriate viscosity according to the average temperature on-
site.
Change the oil as follows:
➤ Allow the generator to run until warm so that the oil can drain off faster and
completely.
➤ Place a suitable receptacle under the drain plug (1).
➤ Remove the dipstick.
➤ Take out the drain plug (1).
✓ The oil drains off.
➤ Pour fresh oil into the filler neck.
The amount of oil is: 1.1 l.
EN
Servicing the generator
43