Connect External Equipment; Connecting To An External Monitor - Ambu aBox 2 Bedienungsanleitung

Move files from procedure folders
to the Bin:
• Press the Archive tab, then press
Procedures.
•
Press the required procedure folder.
•
Select the required files by ticking
the boxes below the thumbnails
or press Select all
• Press the delete icon
then press OK.
Delete files permanently:
•
Press the Archive tab, then press Bin.
•
Press the required folder.
•
Select the required files by ticking the boxes below the thumbnails, or press Select all.
• Press the permanently delete icon

12. Connect External Equipment

See the overview of input and output connections in section 2.4. Please consult the
Instructions for Use of the external equipment for further information. Ensure that the
displaying unit is in STANDBY mode (orange light in power button), turned OFF or
disconnected (no light in power button) when connecting the equipment.

12.1. Connecting to an External Monitor

If needed, connect an external monitor to one of the video out ports (3G-SDI or DVI-D)
located on the back of the displaying unit (see section 2.4. for video out port locations).
Use a medical grade monitor with resolution of at least 1920 x 1080, 60 frames per second (fps)
and a monitor size of at least 27" with DVI and/or 3G-SDI input(s). The recommended color
space is sRGB.
If connection is established via 3G-SDI the external monitor will mirror the complete user
interface shown on the screen of the displaying unit.
If connection is established via DVI-D, the image shown on the external monitor will always
show the Live View image and the following information:
• Stopwatch 00:00 (If enabled in General settings, see chapter 5.).
•
Current procedure folder with a number to indicate the number of photos and videos
made in the current procedure.
•
Zoom icon Z in the top right corner of the live image indicates if the zoom function is
active (must be enabled in General settings (see chapter 5.).
•
ARC icon A in the top right corner of the live view image indicates if ARC is active.
• Live view image.
•
Date and time.
•
When ending a procedure, the Timestamp table will appear.
•
When recording a video, the elapsed recording time next to a recording icon will show in
the upper right corner.
Note: It is advised to connect the external monitor while the displaying unit is turned off.
32
,
20
.
21
,
22
, then press OK.
23
21
22
20
18
19
23