Hella Gutmann
2. Activate the check box Expert mode.
ð Now the expert mode is active.
8.10. Configuring the printer
8.10.1. Search for a printer
Here you can set the print function with the standard printer connected to the PC.
If there is no additional printer connected to the mega macs X, it is possible to print with the printer of a PC system. This
requires a connection between the mega macs X and the PC. The connection to the PC can be realized with USB port or
Wi-Fi.
Proceed as follows to print with the standard printer of a PC:
1. Select
> Settings > Print.
2. Open the drop-down list under Interface with
3. Select >PC<.
4. Click to >Search for a printer<.
ð The diagnostic device searches for available printers.
5. Selected the requested printer.
ð The selection will be saved automatically.
ð Now you can start printing via PC.
8.10.2. Add printer
NOTICE
This selection requires professional knowledge about PC systems must be configured exclusively by an IT
system administrator.
Use the menu >Add printer< to configure the printer interfaces manually.
It is possible to connect to the USB ports of the mega macs X any printer that supports at least the printer language PCL5
or higher and that has a USB port. In order to ensure trouble-free support through the Technical Help Line, we recom-
mend using a printer of Hella Gutmann.
Proceed as follows to add a printer:
1. Select
> Settings > Print.
2. Click to >Add printer<.
3. Now you can enter e.g. Printer name, Printer path and Manufacturer manually.
mega macs X
.
Configuring the mega macs X | 8.
149