Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions For The Mega Macs X; Safety Precautions For High Voltage/Line Voltage - Hella Gutmann mega macs X Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für mega macs X:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
3. | User Information

3.1.3. Safety Precautions for the mega macs X

To prevent incorrect handling and consequent injuries to the user or damage to the diagnostic device, observe the follow-
ing:
• Only connect the original power adapter to the power cord.
• Always use the original battery.
• Protect the diagnostic device from long periods of exposure to solar radiation.
• Protect the diagnostic device and the connecting cable from hot components.
• Protect the diagnostic device and the connecting cable from rotating parts.
• Regularly check the connecting cables/accessory parts for damage (destruction of the diagnostic device due to short
circuit).
• Always connect the diagnostic device according to the instruction in the user manual.
• Keep the diagnostic device away from fluids such as water, oil or gasoline. The mega macs X is not waterproof.
• Protect the diagnostic device from strong impacts and do not drop it.
• Use the charging tray only if it is free of dust and dirt.
• The charging tray and the mega macs X become warm during the inductive charging process. This is due to the
charging principle.
• The diagnostic device is equipped with a cooling system. The corresponding vent slots must not be covered (fire haz-
ard).
• If the diagnostic device shows signs of malfunction, contact Hella Gutmann or your trading partner immediately.

3.1.4. Safety Precautions for High Voltage/Line Voltage

Very high voltages occur in electrical systems. Due to voltage flashover on damaged components, such as marten dam-
age or touching live components, the risk of electric shock is likely. High voltage via the vehicle and line voltage via the
building's mains supply can cause severe injury or even death if adequate care is not taken. Voltage flashover can occur
e.g. on the primary and secondary side of the ignition system, the connection to the vehicle, the lighting systems or the
wiring harness with plug connections. Therefore regard the following:
• Only use power supply cables with grounding contact.
• Only use a checked or the attached power cord.
• Always use the original cable set.
110
Hella Gutmann
mega macs X

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis