Cleaning Method - Parkside PHSA 20-Li B2 Bedienungs- Und Sicherheitshinweise

When trimming young plants to the required
shape: The main growth should remain
undamaged until the hedge has reached
the planned height .
Cutting free‑growing hedges
Trim the hedge regularly so that it grows
densely and does not become too high .
˜ Cleaning and care
m
WARNING! RISK OF INJURY!
Always switch the product off,
remove the battery pack
let the product cool down before
performing inspection, maintenance
or cleaning works and before
storage and transportation .
m
WARNING! RISK OF ELECTRIC
SHOCK!
u
Do not spray the product with water . Do
not immerse the product in water .
m
CAUTION! RISK OF INJURY!
Wear gloves when handling the
safety knife bar
cuts .
20 GB/CY
15 ] [
and
2 ] [
to protect against
˜ Cleaning
NOTE
u
Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
Never let fluids get into the motor housing
10 ] [
.
The product must always be kept clean, dry
and free from oil or grease . Remove debris
from the product after each use and before
storage .
Clean after each use .
Parts
2 ] [
Safety knife bar
5 ] [
Front handle
[ 6 ]
Ventilation slots
[ 8 ]
Rear handle
10 ] [
Motor housing

Cleaning method

Apply oil with an
oil can or spray
(Fig . I and Fig . K) .
Clean with an oily
cloth .
Wipe down with
a damp cloth
(Fig . K) .
Clean with a
brush .