Safety Instructions - Parkside PHSA 20-Li B2 Bedienungs- Und Sicherheitshinweise

NOTE
u
The declared vibration total value and
the declared noise emission value have
been measured in accordance with a
standard test method and may be used
for comparing one tool with another .
u
The declared total vibration value and the
declared noise emission value may also
be used for a preliminary assessment of
exposure .
m
WARNING!
u
The vibration and noise emissions during
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed .
u
It is necessary to identify safety measures
to protect the operator that are based on
an estimation of exposure in the actual
conditions of use (taking account of all
parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time) .

Safety instructions

˜ General power tool safety
warnings
m
WARNING!
u
Read all safety warnings,
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .
Work area safety
1) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents .
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes .
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control .
GB/CY 9