General Notes On Safety; Residual Risks; General Safety Instructions For Power Tools - Parkside PTHSA 20-Li A1 Originalbetriebsanleitung

GB IE NI
Information of the acoustic power
level L in dB.
WA
Machines are not to be place with
domestic waste.
Parkside X 20 V TEAM

General notes on safety

Before working with the equipment,
familiarise yourself with all operating
components. Practice handling the
equipment and have the function,
operation and working methods
explained to you by an experienced
user or specialist. Ensure that you can
shut off the equipment immediately in
an emergency. Inappropriate use of
the device may result in serious injury.
If an accident or fault occurs during opera-
tion, immediately switch off the device and
disconnect at the plug. Treat injuries ap-
propriately or consult a doctor. For the cor-
rection of faults, read the "Trouble Shoot-
ing" chapter or contact our service centre.

RESIDUAL RISKS

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
8
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, ire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of lammable Iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
Caution! The following states how
to avoid accidents and injuries due
to electric shock:
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
ied plugs and matching outlets will
reduce risk of electric shock