Saving Dab+ Stations In Memory Locations; Station Order; Fm Radio - Kenwood CR-ST700SCD Bedienungsanleitung

11.5.1 Storing DAB+ stations with the remote control:
Memory locations 1–10 can be assigned using the number buttons on the remote control. To do
this, select the desired station and press a number key on the remote control until "Preset stored"
appears on the display. The memory locations can now be called up by pressing the remote control
briefly.

11.5.2 Saving DAB+ stations in memory locations 11 - 40:

Select the desired station and hold down the <FAVORITE> button on the radio or <FAV> on the
remote control. Now select a memory location from the list of station memories and confirm the
selection with the <NAVIGATE> button on the radio. The "Preset stored" appears on the display.
You can easily call up the memory locations by briefly pressing the <FAVORITE> button on the radio
or <FAV> on the remote control. Use the <UP/DOWN> buttons or the <NAVIGATE> knob to select
a station and press <OK> to confirm.
Note: The memory locations cannot be deleted, but can only be overwritten with other stations.
11.6 DRC (Dynamic Range Control):
Some DAB+ stations support DRC, which reduces the difference between loud and soft tones. The
following settings are possible:
DRC high:
Strong compression of the different volumes. The dynamic is greatly reduced.
DRC low:
Low compression without much loss of dynamics
DRC off:
There is no compression
To make the settings, proceed as follows:
Press the <MENU> button and select "DRC". The settings for DRC can be changed in the following
menu. The current setting is indicated by "*".

11.7 Station order

By default, the radio sorts the stations in alphabetical order. The stations can also be sorted by
ensembles.
To make the settings, proceed as follows:
Press the <MENU> button and "Sorting stations lists". The settings can be changed in the
following menu. The current setting is indicated "*". The current setting is indicated "*".

12. FM Radio

.
Select "FM" in the main menu to switch to FM reception
12.1 Station search
You can automatically search for FM stations. To start the automatic station search, please press the
<OK> button on the remote control or on the radio. The search stops at the next station found and
the radio starts playing.
Press the <MENU> button and select "ATS" to start automatic search with saving of stations found.
For this, select "Start auto search" "YES" and press the <OK> button to start the search.
18