Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY INSTRUCTIONS
WARNING!
Read all the safety instructions and other
instructions. Failure to follow the safety
instructions and other instructions can result
in electric shock, fire and/or serious personal
injury. Save all the safety instructions and
other instructions for future reference. The
term "power tool" in the safety instructions
refers to your mains-powered (corded) or
battery-powered (cordless) power tool.
SAFETY IN THE WORK AREA
•
Make sure the work area is clean and well
lit. Untidy or poorly lit work areas can
cause accidents.
•
Do not work with this power tool
inenvironments where there is a risk of
explosion, or where there are flammable
liquids, gas or dust. Power tools produce
sparks that can ignite dust and fumes.
•
Keep children and other persons at a safe
distance when using the power tool.
Distractions can cause you to lose control
of the tool.
ELECTRICAL SAFETY
•
The plug on the power tool must match
the power point. The plug must not be
modified in any way. Do not use adapter
plugs together with earthed power tools.
Unmodified plugs and suitable sockets
reduce the risk of electric shock.
•
Avoid body contact with earthed surfaces
such as pipes, radiators, cookers and
refrigerators. There is an increased risk of
electric shock if your body is earthed.
•
Do not expose the power tool to rain or
moisture. There is an increased risk of
electric shock if water enters a power tool.
•
Do not use the power cord for other
purposes, e.g. to carry or hang up the
power tool, or to pull the plug out of the
power point. Protect the power cord from
heat, oil, sharp edges and moving machine
parts. Damaged or tangled power cords
increase the risk of electric shock.
•
When working outdoors with the power
tool only use an extension cord intended
for outdoor use.
•
If you have to use the power tool in damp
conditions use a residual current device.
Use of a residual current device reduces
the risk of electric shock.
PERSONAL SAFETY
•
Pay full attention to what you are doing.
•
Use your common sense when working
with power tools. Do not use power tools
if you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention can result in serious
personal injury.
•
Use personal safety equipment and
always wear safety glasses. The use of
personal protective equipment, e.g. dust
mask, non-slip safety shoes, helmet and
ear protection, according to the type of
power tool and application, reduces the
risk of injury.
•
Avoid accidently starting the power tool.
Check that the tool is switched off before
connecting it to the power supply and/or
battery, or before lifting it or carrying it.
Avoid holding your finger on the power
switch when carrying the power tool. If
the power tool is connected to the power
supply when the power switch is switched
on this can result in personal injury.
•
Remove adjusting tools before starting
the power tool. A tool or screwdriver left in
a rotating machine part can result in
personal injury.
•
Avoid awkward postures. Make sure you
have a firm footing and can maintain your
balance at all times. This will ensure you
have better control over the power tool in
unexpected situations.
•
Wear appropriate clothing. Do not wear
loose-fitting clothing or jewellery. Do not
allow your hair, clothes or gloves to come
near moving parts. Loose-fitting clothing,
EN
31
Werbung
Inhaltsverzeichnis
