How To Connect The Outputs Of The Controller; J6 - Serial - Agilent Technologies Special TV 301-P Bedienungshandbuch

17 Technical Information
Interconnections

How to connect the outputs of the controller

The following figure shows a typical logic output con-nection (relay
coil) but any other device may be con-nected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller.
The figure example refers to the programmable set point signal on
pins 11 and 9.
Figure 13
J6 – Serial
Figure 14
This is a 9 pin D-type serial input/output connector to control via an
RS 232 or RS 485 connection the Special TV 301-P.
146/180
Typical output connection
Special TV 301-P Navigator Controller User Manual / 87-901-002-01 (B)