Changing The Time; Childproof Lock; Deactivating The Childproof Lock; Basic Settings - CONSTRUCTA CC4P86660 Gebrauchs- Und Montageanleitung

13.9 Setting the time
During initial use, the time display is highlighted. ⁠ ⁠ :
flashes on the display and
1.
Set the time using the rotary selector.
2. Press ⁠ .
a The time is set.
13.10 Changing the time
Requirement: The appliance is switched off.
1. Press twice.
a The display shows
14 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
14.1 Activating the childproof lock
Requirement: The appliance is switched off.
▶
Press and hold for approximately 4 seconds.
a The control panel is locked.
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
1
Factory setting (may vary according to model)
lights up.
and the time.
Basic setting
Signal duration
Button tone
Display brightness
Time indicator
Interior lighting
Water hardness
2. Set the time using the rotary selector.
3. Press ⁠ .
a The time is set.
Note: If you do not press
appliance automatically applies the set value after a
few seconds.
If you have changed the position of the function se-
lector while configuring the settings, you can only use
the appliance once you turn the function selector to the
zero setting.
To reduce the standby consumption of your appliance,
you can hide the clock.
appears on the display.
a
Note: If you have set a timer duration
to count down. While the childproof lock is active, the
timer duration cannot be changed.
You can end the signal tones by touching any field.
14.2 Deactivating the childproof lock
▶
Press and hold
a The control panel is unlocked.
Selection
= short = 10 seconds
= medium = 30 seconds
= long = 2 minutes
= off
1
= on
= low
1
= medium
= high
= off
1
= on
= off
1
= on
= softened
= soft
= moderate
= hard
1
= very hard
Childproof lock en
after setting the time, the
, this continues
for approximately 4 seconds.
Description
Set the signal duration for
1
after a cooking time
elapses or the timer
reaches zero.
Switch the button tones on
or off.
Set the brightness of the
display.
Show the clock time in the
display.
Switch the interior lighting
on or off.
Set the water hardness
→ Page 62.
75