Operating Controls - Elektra Beckum Hobbymaster KS 250 Betriebsanleitung

Retractable blade guard (2)
The retractable blade guard protects against unin-
tentional contact with the saw blade and from chips
flying about.
The retractable blade guard must always close
automatically: if the sawhead is fully lifted, the teeth
of the saw blade must be fully covered.

Operating controls

On/off switch
· To start motor:
- depress switch button.
· To stop motor:
- release switch button.
Sawhead tilt lock lever
After loosening the lock lever on the rear the saw
head can be steplessly tilted from vertical through
45°.
2.3
Turntable
For mitre cuts the cutting angle is adjusted. In both
directions an angle of more than 45° is possible.
To adjust the turntable:
1. Loosen adjusting lever (counter-clockwise);
2. push catch down;
3. set desired angle
4. Release catch and tighten adjusting lever.
Fence (1) and work clamp (2)
Fence and work clamp keep the workpiece from
being moved while being cut. To achieve this, the
workpiece is pushed against the fence by the work
clamp.
1
2
KS 250