Rain; Light Intensity, Uv Index & Sunburn Time - Bresser 4Cast PRO Bedienungsanleitung

4.3.10 RAIN

The RAINFALL section shows the rainfall or rain rate information.
4.3.10.1 THE RAINFALL DISPLAY MODE
Press [ RAIN ] key to toggle between:
1. RATE - Current rainfall rate (base on 10 min rain data)
2. HOURLY - the total rainfall in the past hour
3. DAILY - the total rainfall from midnight (default)
4. WEEKLY - the total rainfall of the current week
5. MONTHLY- the total rainfall of the current calendar month
6. TOTAL - the total rainfall since the last reset
4.3.10.2 TO RESET THE TOTAL RAINFALL RECORD
In normal mode, press and hold [ RAIN ] key for 2 seconds to reset all the rainfall record.
NOTE:
Erroneous readings may occur during the installation of the 7-in-1 sensor array. Once the
installation is completed and functioning correctly, it's advisable to clear all the data and start
afresh.
4.3.11 LIGHT INTENSITY, UV INDEX & SUNBURN TIME
This section of display show the sunlight intensity, UV index and sunburn time.
4.3.11.1 SOLAR LIGHT INTENSITY & SUNBURN TIME MODE:
During light intensity mode, press [ SUN ]
key to switch between sunlight intensity
and sunburn time
UV INDEX VS SUNBURN TIME TABLE
Exposure level
UV index 1
Sunburn time
Recommended
protection
NOTE:
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker
one's skin is, the longer (or more radiation) it takes to affect the skin.
- The light intensity function is for sunlight detection.
4.3.11.2 UV INDEX MODE
To show the current UV index detected by the outdoor sensor.
Low Moderate
2 3 4
N/A 45 minutes
N/A
Moderate or high UV level! Suggest to
wear sunglasses, broad brim hat and
long-sleeved clothing.
Light intensity mode
High
5 6 7
30 minutes
Very high or Extreme UV level! Suggest to
wear sunglasses, broad brim hat and long-
sleeved clothing, If you have to stay outdoors,
make sure to seek shade.
65
Period of rainfall
Sunburn time mode
Very high
8 9 10
15 minutes
Extreme
11 12~16
10 minutes