Advance Setting In Web Interface - Bresser 4Cast PRO Bedienungsanleitung

6.4

ADVANCE SETTING IN WEB INTERFACE

Press "ADVANCED" key at the top of web interface to enter the advance setting page, this page
allow you to set and view the calibration data of the console, as well as update the firmware
version on PC/Mac web browser.
Press "SETUP" icon to
setup page
Select setting unit
In/Outdoor & CH 1~7
temperature calibration
section
Pressure calibration
section
The rain, wind speed, UV
and light calibration use gain
method. The wind direction
is +/- 90 offset
The PM2.5 and PM10 is
+/-99 offset
(PM2.5 /10 calibration
setting is for optional
sensor only)
Current firmware version
SETTINGS
SETUP
Temperature o C
Indoor
Current offset: 0
Outdoor
Current offset: 0
CH 1
Current offset: 0
CH 2
Current offset: 0
CH 3
Current offset: 0
CH 4
Current offset: 0
CH 5
Current offset: 0
CH 6
Current offset: 0
CH 7
Current offset: 0
Range: -20.0 ~ 20.0 o C
-36.0 ~ +36.0 o F (Default: 0.0)
Pressure
Absolute Pressure Offset:
Relative Pressure Offset:
Setting Range:
-560~ 560hpa / -16.54 ~ 16.54inHg / -420 ~ 420mmHg
*Rain gain:
*Wind speed gain:
*Wind direction:
*UV gain:
*Light gain:
*PM2.5:
*PM10:
* Depends on the model
Firmware version: 1.00
ADVANCED page
ADVANCED
Humidity %
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Range: -20 ~ 20%
(Default: 0.0)
hpa
Current offset: 0
(Default: 0)
Current offset: 0
(Default: 0)
Current gain: 1.00
Range: 0.5 ~ 1.5(Default: 1.00)
Current gain: 1.00
Range: 0.5 ~ 1.5(Default: 1.00)
o
Current offset: +0
o
Range: -90 ~ 90(Default: 0
Current gain: 1.00
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.00
Range: 0.01 ~ 10(Default: 1.00)
Current offset: 0
Range: -99 ~ 99(Default: 0)
Current offset: 0
Range: -99 ~ 99(Default: 0)
Browse
Upload
75
In/Outdoor & CH 1~7
humidity calibration
section
Select setting unit
Current offset value
is the value that you
set before to offset the
pressure reading
)
The firmware update
function only available
in PC/Mac web browser