Setting Alarm Time - Bresser 4Cast PRO Bedienungsanleitung

5 Month
6 Day
7 M-D/D-M format
8 Select Sunrise /
Sunset or Moon
rise / Moon set
display
9 Time sync ON/OFF Press [
10 Weekday language
NOTE:
- In normal mode, press [ SET ] key to switch between year and date display.
- During the setting, you can back to normal model by press and hold [ SET ] key for 2 seconds.

4.4.2 SETTING ALARM TIME

1. In normal time mode, press and hold [ ALARM ] key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2. Press [ / INDEX ] or [
quick-adjust.
3. Press [ ALARM ] key again to step the setting value to Minute with the Minute digit flashing.
4. Press [ / INDEX ] or [
5. Press [ ALARM ] key to save and exit the setting.
NOTE:
- In alarm mode, the "
- The alarm function will turn on automatically once you set the alarm time.
4.4.2.1 ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds.
2. When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or
press [ ALARM ] key twice to activate the alarm with ice pre-alarm function.
Alarm off
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30
minutes earlier if the outdoor temperature is below -3°C.
When clock reach the alarm time, alarm sound will start.
Where it can be stopped by following operation:
- Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in the next day.
- By pressing [ALARM / SNOOZE] key to enter snooze that the alarm will sound again after 5 minutes.
- By pressing and hold [ALARM / SNOOZE] key for 2 seconds to stop the alarm and will activate again in
the next day
- By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day.
NOTE:
- The snooze could be used continuously in 24 hours.
- During the snooze, the alarm icon "
Press [ / INDEX ] or [
Press [ / INDEX ] or [
Press [ / INDEX ] or [
or "Day / Month" display format
Press [ / INDEX ] or [
Sunset or Moon rise / Moon set display
/ INDEX ] or [
time sync function.
If you want to set the time manually, you should set time sync
OFF
Press [
/ INDEX ] or [
display language
/ MODE] key to change the value. Press and hold the key for
/ MODE] key to adjust the value of the flashing digit.
" icon will display on the LCD.
" will keep flashing.
/ MODE ] key to adjust the month
/ MODE ] key to adjust the day
/ MODE ] key to select "Month / Day"
/ MODE ] key to select Sunrise /
/ MODE ] key to enable or disable
/ MODE ] key to select weekday
Alarm on
69
Alarm with ice-alert