Install Wind Vane; Install Rain Gauge Funnel; Install Rechargeable Batteries - Bresser 7803210 Bedienungsanleitung

3.1.1 INSTALL WIND VANE

With reference to photo below, (a) locate and align the flat are on the wind vane shaft to the
flat surface on the wind vane and push the vane onto the shaft. (b) tighten the set screw with a
precision screwdriver.

3.1.2 INSTALL RAIN GAUGE FUNNEL

Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array

3.1.3 INSTALL RECHARGEABLE BATTERIES

Step 1: Unscrew the battery door at bottom of unit and
take out the cable socket.
Step 2: Connect the Ni-MH rechargeable battery plug to
the socket.
Step 1
Lock
grooves
Step 2
Step 1
7
Step 2