Adjusting The Waiting Period Of The Screensaver - G&D VisionXS-F-DP-UHR Installation Und Bedienung

Configuration

Adjusting the waiting period of the screensaver

The screensaver turns off the display of the console after the user has been inactive
for a defined period of time.
NOTE:
This setting does not affect the screensaver settings of the computer con-
nected to the computer module.
How to adjust the waiting period of the screensaver:
1. Press
Ctrl+Num
2. Select the row
3. Under Screensaver (min)
screensaver.
Entering the value 0 disables the screensaver.
4. Press F2 to save your settings.
1. In the menu, click on
2. Click twice on the user module (
figure.
3. In the Screensaver (minutes)
the screensaver.
Entering the value 0 disables the screensaver.
4. Click on
Save
51 · G&D VisionXS-F-DP-UHR
(default) to open the on-screen display.
Console setup and press
enter a waiting period (1 to 999 minutes) for the
KVM extender
row, enter the waiting time (1 to 999 minutes) of
.
Enter .
.
or
CON-Trans 1 CON-Trans 2
) you want to con-