Ariete 1312 Bedienungsanleitung Seite 41

Enter the "Maintenance" menu (from the home page, "Guide and Setting") to display and start the descaling
cycle of the appliance.
When a message demanding descaling appears on the display, a descaling cycle must be carried out.
Start the "Descaling cycle" from the display and follow the instructions given on the display.
Slowly turn the lter holder from right to left to remove it so as to avoid splashing water or coffee (Fig.
Remove the water softener lter from the water tank.
Fill the water tank with fresh water up to the MAX level (Fig. ).
Pour the descaling solution into the water tank.
Place a container under the lter holder seat, which shall be larger enough to collect the water of the tank.
Place the steam/hot water wand into the container.
The descaling process begins and the solution into the tank starts running through the lter holder seat and
through the steam/hot water wand.
Limescale deposits will thus be removed from the internal circuit of the appliance.
After several washing cycles and breaks, the descaling process is over.
Remove the water tank and rinse it with fresh water.
Fill the water tank with fresh water up to the MAX level (Fig. ).
Steam wand cleaning
Warning!
The procedure must be carried out when the steam/hot water wand has cooled down to avoid burns.
Start the "Steam wand cleaning" from the display and follow the instructions given on the display.
Remove the nozzle from the steam/hot water wand (Fig.
You can clean the steam/hot water wand using a non-abrasive cloth.
If needed, clean the hole of the nozzle by using the provided needle (Fig. 6).
Fasten the steam nozzle until it is locked in place.
After each use, distribute steam for a few seconds so as to clean the hole from any residue.
) and rinse it under running water.
).
41