Service Data - JUNO JB126S2 Benutzerinformation

Problem
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "C3".
The display shows "F102".
The display shows an error code
that is not in this table.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo"
.

14.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
28 ENGLISH
Possible cause
You left the dish in the oven for
too long.
The cleaning function does not
operate. You did not fully close
the door, or the door lock is de‐
fective.
• You did not fully close
the door.
• The door lock is defec‐
tive.
There is an electrical fault.
The demo mode is activated.
.........................................
.........................................
.........................................
Remedy
Do not leave the dishes in the
oven for longer than 15 - 20 mi‐
nutes after the cooking process
ends.
Fully close the door.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Refer to "Using the settings
menu" in "Additional functions"
chapter.