Clock Functions - JUNO JB126S2 Benutzerinformation

Oven func‐
tion
Keep Warm
7.2 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements according to EU 65/2014 and
EU 66/2014. Tests according to EN 60350-1.
The oven door should be closed during
cooking so that the function is not interrupted
and the oven operates with the highest
energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
7.3 How to set: Heating Functions
1. Turn on the oven with
The display shows the set temperature, the
symbol and the number of the heating
function.
2. Press or
3. Press or the oven starts automatically
after 5 seconds.
If you turn on the oven and do not set any
heating function or programme, the oven
turns off automatically after 20 seconds.

8. CLOCK FUNCTIONS

8.1 Clock functions table
Clock function
Time of Day
Duration
Application
To keep food warm.
.
to set a heating function.
Application
To show or change the time of day. You can change the time of day
only when the oven is on.
To set how long the oven works.
7.4 How to set: Temperature
Press or to change the temperature in
steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
7.5 How to check: Temperature
You can check the current temperature in the
oven when the function or programme works.
1. Press .
The display shows the temperature in the
oven.
2. Press or the display shows again the
set temperature automatically after 5
seconds.
7.6 How to set: Fast Heat Up
Do not put food in the oven when the Fast
heat up works.
The Fast Heat Up is available only for some
heating functions. If Faulty Tone is turned on
in the settings menu, the signal sounds if the
Fast Heat Up is not available for the set
function. Refer to "Additional functions"
chapter, Using the settings menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and hold
for more than 3 seconds.
If the Fast Heat Up is turned on the display
shows flashing bars.
ENGLISH 13