Clock Functions - JUNO JB096B2 Benutzerinformation

12

CLOCK FUNCTIONS

Clock functions table
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
00:00
Count Up Timer
How to set: Time of day
After the first connection to the mains, wait
until the display shows: hr, 12:00. 12 -
flashes.
Step 1
,
Step 2
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
Step 3
,
Step 4
- press to confirm.
The display shows the set time.
- press repeatedly to change the time of day.
Application
To show or change the time of day. You can change the
time of day only when the oven is off.
To set the length of cooking. Use only when a heating
function is set.
To set the oven turn-off time. Use only when a heating
function is set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on
the operation of the oven.
Minute Minder - can be set at any time, also if the oven is
off.
If you do not set any other clock function the function au‐
tomatically monitors how long the oven works.
Counting starts immediately when the oven starts to heat.
Count Up Timer cannot be used with the functions: Dura‐
tion, End Time.
- press to set the hour.
- press to set the minutes.
- flashes in the display.