Service Data; Energy Efficiency - JUNO JB121D0 Benutzerinformation

Problem
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows an error
code that is not in this table.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".

Service data

If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

ENERGY EFFICIENCY

Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional
mode
Energy consumption with a standard load, fan-forced
mode
Possible cause
You left the dish in the oven
for too long.
There is an electrical fault.
The demo mode is activa‐
ted.
.........................................
.........................................
.........................................
Remedy
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De‐
partment.
Refer to "Using the settings
menu" in "Additional func‐
tions" chapter.
Juno
JB121D0 949497017
81.2
A+
0.93 kWh/cycle
0.69 kWh/cycle
27