Honda HSM1380i Bedienungsanleitung Seite 57

Operation
1. Start the engine (see pages
2. Select the snow clearing work mode.
− 1. Check that the main shift lever is in the N (neutral) position.
− 2. Select the appropriate work mode to clear the snow by pushing
the ICS switch to either the ON or OFF position (HSM1380i)./
turning the mode selector switch to either the SELF, POWER, or
AUTO position (HSM1390i).
Note that the operation and performance of the snowblower differ
according to the work mode you select. Select the appropriate work
mode for your situation (see pages
characteristics of each mode).
[HSM1380i]
ICS SWITCH
Tips for selecting the work mode:
AUTO mode (HSM1390i): see page
1) Not familiar with operating the snowblower.
2) Does not want to operate the various switches while clearing the
snow.
3) Want to clear the snow as quietly as possible.
4) Want the auger to rise up as little as possible.
ON (HSM1380i)/POWER (HSM1390i) mode: see pages
1) Want to adjust the traveling speed automatically according to the
workload while clearing the snow.
2) Want to throw the snow far from the snowblower.
3) Want to finish clearing the snow as quickly as possible.
OFF (HSM1380i)/SELF (HSM1390i) mode: see pages
Want to operate the switches as you like.
54
43 through
······ ON
······ OFF
ON
OFF
22
46 ).
21 through
[HSM1390i]
MODE SELECTOR SWITCH
SELF
.
21
23 for the
AUTO
POWER
21 and 23 .
and 23 .