Drive Shaft Alignment - PCE Instruments PCE-TU 3 Bedienungsanleitung

If all measurements are finished, a blinking
results by pressing this symbol. To restart the Soft Foot Measurement, press
7.4

Drive Shaft Alignment

This program serves to the alignment of those machines connected by a drive shaft or cardan shaft. With
the optional mounting kit for cardan shafts, the sensors can be mounted. The cardan shaft alignment is
mostly identical to the horizontal machine alignment. Therefore, please do refer to chapters 7.1
("Horizontal machine alignment") and 5.5 ("Rough alignment"). The differences to these chapters
are described in the following
Drive Shaft main menu
What should be noted in this window
Before the measurement, a Soft Foot
Measurement should be carried out
to avoid unexpected measurement
errors.
Check the result after alignment by
measurement again
Functions in this window
- Acquire new data and start alignment
- Continue alignment
- Change distances and dimensions
- Change the parameters
Manual
symbol appears and you can save the measurement
Shortcuts in this window
Acquire new data
Continue the alignment procedure
Change the machine dimensions and
distances
Change the paramters
41
Last
screen
.