Finish Cooking - Atag BIH064 EV-Serie Bedienungsanleitung

OPERATION
4. Within 3 seconds, set the power level by touching the slide control or the boost key.
The cooking zone starts automatically at the level that has been set.
▷
Set a higher or lower power level with the slide control.
▷
After 5 seconds the slide control will switch off.
▷
5. Move the pans, if desired, over the hob from one cooking zone to another cooking zone
(while maintaining all settings). Consult chapter 'Use/Pan move function'.
When the pan detection symbol appears in the display:
• you have not placed a pan on the correct cooking zone;
• the pan you're using is not suitable for induction cooking;
• the pan is too small or not properly centred on the cooking zone.
The cooking zone will not work unless there is a suitable pan on the cooking zone.
▷
If the hob is not used for 20 seconds, it will shut off automatically.

Finish cooking

1. Set the power level to '0' to turn off the cooking zone.
2. Turn the induction hob off by touching the On/off key.
Symbol H will appear in the display of the cooking zone which is too hot to touch. The
symbol disappears when the surface has cooled down to a safe temperature. It can also
be used as an energy saving function; if you want to heat other pans, use the cooking
zone that is still hot.
EN 16
B
2
B 2
B
2