Specifications - Stihl MSA 220 C Gebrauchsanleitung

English
Fault LEDs on the
battery
STIHL connected
app is unable to
find the battery
with .
20.2 Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information, please visit
https://support.stihl.com or www.stihl.com.

21 Specifications

21.1 STIHL MSA 220 C Chainsaw
– Approved batteries:
– STIHL AP
– STIHL AR
– Weight without battery, guide bar and saw
chain 2.9 kg
– Max. oil tank capacity: 210 cc (0.21 l)
For battery life see www.stihl.com/battery-life.
21.2 Chain Sprockets and Chain
Speeds
The following chain sprockets may be used:
– 6-tooth for 3/8" P
– Maximum chain speed: 23.3 m/s
21.3 Minimum Groove Depth of
Guide Bars
The minimum groove depth depends on the pitch
of the guide bar.
– 3/8" P: 5 mm
21.4 STIHL AP battery
– Battery technology: lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: + 10 °C to + 50 °C
®
– Bluetooth radio interface (only for batteries
with ):
– Data connection: Bluetooth
mobile appliance must be compatible with
56
Cause
®
Bluetooth radio inter‐
face on the battery or
mobile device is deac‐
tivated.
Distance between bat‐
tery and mobile
device is too long.
®
5.1. The
Remedy
► Activate Bluetooth
battery or mobile device.
► Reduce distance,
► If the battery still cannot be found with
the STIHL connected app: Contact a
STIHL authorized dealer for assistance.
®
Bluetooth Low Energy 5.0 and support
Generic Access Profile (GAP).
– Frequency band: ISM band 2.4 GHz
– Maximum RF power transmitted: 1 mW
– Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile terminal. Signal range can
vary greatly depending on local conditions,
including the receiver. The range may be
perceptibly reduced inside enclosed rooms
and through metal barriers (such as walls,
shelves or cases).
– Mobile appliance operating system require‐
ments: Android or iOS (current version or
higher)
21.5 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). The
K-value for vibration level is 2 m/s².
MSA 220 C 3/8" P
– Sound pressure level L
to EN 60745‑2‑13: 89 dB(A)
– Sound power level L
EN 60745-2-13: 100 dB(A)
– Vibration level a measured according to
hv
EN 60745-2-13:
– Control handle: 3.6 m/s²
– Handlebar: 4.8 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times when the electric power tool is
switched off and the times when it is switched on
but running under no load can be taken into
account in the estimate.
21 Specifications
®
radio interface on the
21.4.
measured according
pA
measured according to
wA
0458-795-9821-B