Using The Appliance; Operating The Robot Vacuum Cleaner - Philips FC9910 Handbuch

1 Clear the floor of objects such as toys, magazines and shoes. Push
aside or remove the mains cords of other appliances.
2 Close doors to rooms you do not want the robot vacuum cleaner to
clean.
Note: The sensors of the robot vacuum cleaner are able to detect height
differences and prevent the robot vacuum cleaner from falling down steps or
stairs.

using the appliance

Operating the robot vacuum cleaner

using the buttons on the robot vacuum cleaner and on the
remote control
1 Press the power button on the robot vacuum cleaner or on the
remote control.
The robot vacuum cleaner enters operational mode: the display goes
,
on.
Note: You can only use the remote control after you have switched on the robot
vacuum cleaner with the on/off switch on the bottom.
2 Press the start/pause button on the robot vacuum cleaner or on the
remote control to start cleaning.
If you do not press the mode button, the robot vacuum cleaner
,
automatically starts to clean in auto cleaning mode.
, The start/pause indication flashes on the display and the cleaning
time starts to count up from 0.
3 To change the cleaning mode, press the mode button on the robot
vacuum cleaner or on the remote control when the appliance is in
operational mode.
English
19