WAGNER finishcontrol 6500 tS Betriebsanleitung Seite 22

GB
contents
translation of the original operating instructions
contents
1 SAfety regulAtIonS ______________________ 17
2 eXPlAnAtory dIAgrAM ____________________ 20
3 SettIng And dISPlAyS on the
control PAnel ___________________________ 20
4 the WAgner clIck&PAInt SySteM __________ 21
4.1 Disassembly of the spray gun __________________ 21
5 technIcAl dAtA ___________________________ 21
6 IntroductIon to SPrAyIng uSIng the XvlP
Procedure ________________________________ 21
7 coAtIng MAterIAl _________________________ 21
7.1 Coating Materials Suitable for Use _______________ 21
7.2 Coating Materials Not Suitable for Use ___________ 21
7.3 Coating materials that can only be processed with
relevant spray attachment (accessories) __________ 22
7.4 Preparing the coating material __________________ 22
8 SettIng the SPrAy gun ____________________ 22
8.1 Setting the required spray pattern _______________ 22
8.2 Setting the amount of material _________________ 22
8.3 Setting the amount of air ______________________ 22
8.4 Align the feed tube ___________________________ 22
9 StArtIng oPerAtIon ______________________ 22
10 SPrAyIng technIque ______________________ 23
11 BreAkS In Work ___________________________ 23
12 trAnSPortAtIon __________________________ 23
13 tAkIng out of oPerAtIon And cleAnIng __ 24
13.1 Assembly ___________________________________ 24
14 MAIntenAnce _____________________________ 25
14.1 Air filter ____________________________________ 25
14.2 Air relief valve _______________________________ 25
15 correctIon of MAlfunctIonS ____________ 26
16 AcceSSorIeS And SPAre PArtS _____________ 27
16.1 Accessories _________________________________ 27
16.2 Spare parts FinishControl ______________________ 28
16.3 Spare Parts TempSpray spray attachment _________ 28
Testing of the unit ________________________________ 29
Note on disposal _________________________________ 29
Important information on product liability ____________ 29
16
FinishControl 6500 TS
Guarantee declaration _____________________________ 29
CE - declaration _________________________________ 136
European service network _________________________ 138
explanation of symbols used
this symbol indicates a potential danger
for you or for the device.
under this symbol you can find important
information on how to
avoid injuries and damage to the device.
Indicates tips for use and other particularly
i
useful information.
Wide spray jet setting
narrow spray jet setting
Wear protective gloves.
Attention! hot surface