Aesculap Spine
4
S
percutaneous instruments
Legend
1 Cleaning instrument FW692R
2 Clamping sleeve FW693R
3 Inner sleeve FW694R
4 Screwdriver FW695R
4
(for polyaxial S
screws)
5 Screwdriver FW696R
4
(for monoaxial S
screws)
6 Axial spacer FW143P
7 Insertion instrument for locking screws FW697R
Symbols on product and packages
Symbol
Explanation
Caution, general warning symbol
Caution, see documentation sup-
plied with the product
Date of manufacture
Intended use
4
S
percutaneous instruments are used for the implan-
4
tation of cannulated S
implants of the S
tem in percutaneous operating technique.
Safe handling and preparation
CAUTION
Federal law restricts this device to sale by or on
order of a physician!
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge or experience.
Read, follow and keep the instructions for use.
Use the product only for its intended purpose, see
Intended use.
Remove the transport packaging and thoroughly
clean the new product, either manually or mechan-
ically, prior to its initial sterilization.
2
Store any new or unused products in a dry, clean,
and safe place.
Prior to each use, inspect the product for loose,
bent, broken, cracked, worn, or fractured compo-
nents.
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
Replace any damaged components immediately
with original spare parts.
Read, observe and keep the operating manuals for
4
S
Spinal System Instrumentation, S
applicable, S
Safe operation
DANGER
4
Spinal Sys-
WARNING
4
4
SRI.
Danger of death of the patient
caused by pushing the guide wire
into the aorta!
When inserting the S
4
or S
instruments with the
guide wire, always observe the
markings on the guide wire.
Hold the guide wire with a for-
ceps.
Remove the guide wire at the
right moment.
Risk of injury and/or malfunction!
Always carry out a function
check prior to using the prod-
uct.
FRI and, if
4
implants