Servicing The Gearbox; Changing The Gearbox Oil - Toro Z Master Professional 7000-Serie Bedienungsanleitung

1. Spring washers
2. Locknut

Servicing the Gearbox

Checking the Gearbox-Oil Level
Service Interval: Every 100 hours
Use SAE 75W-90 synthetic gear lube.
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the side or rear plug on the gearbox
(Figure 75).
4. The oil should be up to the opening of the
gearbox.
5. Add oil if needed to bring it to the correct level.
Figure 74
3. Dust cap
g001297
1. Gearbox
2. Side plug

Changing the Gearbox Oil

Service Interval: After the first 100 hours
Yearly
Contact an Authorized Service Dealer to change the
gearbox oil.
56
Figure 75
3. Pulley
4. Rear plug
g001156