Pre-Maintenance Procedures; Releasing The Mower-Deck Curtain; Engine Maintenance; Engine Safety - Toro Titan X4850 Bedienungsanleitung

Pre-Maintenance
Procedures
Releasing the Mower-Deck
Curtain
Loosen the 2 bottom bolts of the curtain to access the
top of the mower deck
Figure 41
1. Bottom bolt
Note:
Always tighten the bolts to connect the curtain
after maintenance.
(Figure 41).
2. Curtain

Engine Maintenance

Engine Safety

•
Keep your hands, feet, face, clothing, and other
body parts away from the muffler and other hot
surfaces. Allow engine components to cool before
performing maintenance.
•
Do not change the engine governor speed or
overspeed the engine.

Servicing the Air Cleaner

Service Interval: Before each use or daily
Note:
Service the air cleaner more frequently (every
few hours) if operating conditions are extremely dusty
or sandy.
Removing the Foam and Paper
Elements
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
g303960
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean around the air-cleaner cover to prevent
dirt from getting into the engine and causing
damage.
4. Lift the cover and rotate the air-cleaner assembly
out of the engine
34
(Figure 42).