Falcon 211 GEO T DL Benutzerhandbuch Und Installations- Und Wartungsanleitung Seite 46

English
c) Re-tighten the locknut.
20 To Remove the Hotplate Spark Generator
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at
the appliance rear. Remove the fixings that secure
the cover and lift it clear.
b) Undo the terminal connections noting their
positions.
c) Undo the fixings that secure the spark generator
and remove the device.
21 To Remove the Hotplate Electrode Leads
Disconnect from the electricity supply.
Pull the unit forward to access the rear of the
appliance.
a) Remove the pan supports, hotplate accessories
and burner heads.
b) Remove the hotplate as detailed in Section 2.
c) Remove the cover box and disconnect all HT leads
at the generator.
d) Remove the lower back panel and disconnect the
lead at the electrode.
e) Pull the sleeved bundle of HT leads up through the
rear upright.
f) Pull the appropriate lead from the sleeve and push
in the replacement.
g) Replace the leads in the rear upright.
h) Re-connect the leads at the generator and oven
electrode.
j) Re-assemble in reverse order and check ignition.
22 To Remove Oven Inner Back
a) Open the oven door. For the LH oven unscrew the
2 thermostat phial fixing screws. Remove the
fixings that secure the inner back to the oven rear.
b) Lift the removable panel away.
c) Re-assemble in reverse order. Ensure that the
retaining fixings are fully tightened.
23 To Replace an Oven Fan
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at
the rear of the appliance. Remove the fixings that
secure the cover and lift it clear.
b) Remove the fan wiring, noting the connection
positions.
c) Remove the inner back as detailed in Section 22.
d) Hold the fan blades and undo the centre nut (LH
thread), brass washers, fan blade and circlip.
e) Undo the fixings that retain the fan and remove it
from the cavity rear.
f) Fit the replacement and re-assemble parts in
reverse order. Check that the oven operates
satisfactorily.
25 To Remove an Oven fan Element
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at
the rear of the appliance. Remove the fixings that
secure the cover and lift it clear.
b) Undo the terminal connections noting their
positions.
c) Remove the inner back as detailed in Section 22.
d) Remove the fixings that secure the element within
the oven and lift the element away carefully.
e) Fit the replacement element and re-assemble parts
in reverse order.
f) Check that the oven operates correctly.
26 To Remove the LH Oven Bottom and Top
Elements
Disconnect the appliance from the electricity supply.
Bottom Element
a) Pull the unit forward to access the cover boxes at
the rear of the unit. Remove the fixings that secure
the cover and lift it clear.
b) Undo the terminal connections, noting their
positions.
c) Remove the fixings that secure the bottom element
cover.
d) Undo the terminal connections, noting their
positions.
e) Remove the lower element support fixings.
f) Remove the element bracket fixings and withdraw
element.
g) Replace the element and re-assemble parts in
reverse order.
Top Element
a) Open the LH oven door and undo the fixings that
secure the heat shield.
b) Remove the top element bracket fixings and
withdraw element.
c) Replace the element and re-assemble parts in
reverse order. Check that the oven operates
satisfactorily.
27 To Remove a Grill Element
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at
the rear of the appliance. Remove the fixings that
secure the cover and lift it clear.
b) Undo the terminal connections, noting their
positions.
c) Remove the grill pan.
d) Remove the fixings that secure the element front
support from within the chamber.
e) Remove a fixing from each of the elements and
withdraw the elements from the chamber.
f) Fit the replacement element(s) and re-assemble
parts in reverse order. Check operation of the grill.
46