Falcon 211 GEO T DL Benutzerhandbuch Und Installations- Und Wartungsanleitung Seite 35

Stainless Steel Hob
Lift away pots or pans from hob. Remove pan
supports from spillage area and carefully place
in a sink of warm soapy water. Wipe loose
debris from hob.
Avoid using any abrasive cleaners including
cream cleaners on brushed Stainless Steel
surfaces. For best results use a liquid detergent
cleaner.
Rinse with cold water and thoroughly dry with a
clean, soft cloth. Ensure all parts are dry before
repositioning.
Hotplate burners
The burner heads and caps can be removed for
cleaning. Make sure they are absolutely dry
before replacing.
A burner head
When fitting burner head, ensure this locates
properly within the bezel.
Check burner ports are not blocked. If blockage
occurs, remove stubborn particles using a piece
of fuse wire.
Grill
The grill pan and grid should be washed in hot
soapy water.
After grilling meats or any foods that soil, leave
to soak for a few minutes in the sink immediately
after use. Stubborn particles may be removed
from the grid by using a nylon brush.
To remove the grill pan pull the grill carriage
forward and lift the grill pan away from the
carriage.
B burner bezel
To remove the grill carriage, lift it so that the
front roller is free of the side arm.
Slide the carriage forward on the rear roller until
you can lift it away from the side arm.
The side arms can also be removed for
cleaning. Push them fully back and then lift them
off the rollers mounted on the grill chamber
sides.
To replace to replace the grill parts start by
hooking the side arms onto the rollers on the
grill chamber sides.
35
English