Starting The Fan; Switching Off The Fan - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.13. Starting the fan

When the dimmer switch function is activated
When the dimmer switch function for the fan is activated, the power for the fan
can be set to a scale of 0 to 100. 100 corresponds to full power.
1. Select the fan symbol 2 by pressing mode button D. Then briefly press
the On/Off button A.
► The fan switches on.
► The display 1 shows the intensity.
2. Set the desired power of the fan with the plus button B and the minus button C.
► The display 1 shows the set intensity.
When the dimmer switch function is deactivated
When the dimmer switch function for the fan has been deactivated, you can only
switch the fan on and off. The device will always operate at full power.
1. Select the fan symbol 2 by pressing mode button D. Then briefly press
the On/Off button A.
► The fan switches on.
► The display 1 shows "on".

10.14. Switching off the fan

1. Select the fan symbol 2 by pressing mode button D. Then briefly press
the On/Off button A.
► The fan switches off.
► The display 1 shows "oFF"
p. 56/70