Activating The Control Panel; Additional Output Control Panel Pro D (Optional) - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.3. Activating the control panel

The control unit can be started with the last used settings for temperature, humid-
ity* and light or with the standard settings.
● For activation with the last used settings, press the On/Off button A for one
second.
► The control panel is activated.
► The symbol 5 lights up. The last used settings for temperature, humid-
ity* and light are active.
● For activation with the standard settings, press the On/Off button A for about
3 seconds.
► The control panel is activated.
► The symbol 5 lights up. The standard settings for temperature (90 °C),
humidity* (off) and light (50%) are active.
* The humidity function is only available on the Pro D3/Pro D3i models.

10.4. Additional output control panel Pro D (optional)

If the control unit has been activated as described in 10.3. Activating the control
panel, for the Pro D2i and Pro D3i models the function 7 (additional output)
can also be activated with "Additional output control panel Pro D".
● Press the On/Off button A of the additional output control panel for one second.
► The additional output function is active.
► The display shows the set intensity.
a
p. 49/70
EN