Bar And Chain Combinations - Stihl MSA 220 C Gebrauchsanleitung

20 Bar and Chain Combinations

19.2 Chain Sprockets and Chain
Speeds
The following chain sprockets may be used:
6-tooth for 3/8" P
– Maximum chain speed: 23.3 m/s
19.3 Minimum Groove Depth of
Guide Bars
The minimum groove depth depends on the pitch
of the guide bar.
– 3/8" P: 5 mm
19.4 STIHL AP battery
– Battery Technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
19.5 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). The
K-value for vibration level is 2 m/s².
MSA 220 C 3/8" P
– Sound pressure level L
to EN 60745‑2‑13: 89 dB(A)
20 Bar and Chain Combinations
20.1 STIHL MSA 220 C Chainsaw
Pitch Drive link
gauge/groove
width
3/8" P 1.3 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
0458-795-9621-C
measured according
pA
Length Guide bar
30 cm
CM 35
CM 40
30 cm
CM 35
CM 40
Rollomatic E
Rollomatic E light
30 cm
CM 35
CM 40
30 cm
CM 35
CM 40
– Sound power level L
EN 60745-2-13: 100 dB(A)
– Vibration level a measured according to
hv
EN 60745-2-13:
– Control handle: 3.6 m/s²
– Handlebar: 4.8 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times when the electric power tool is
switched off and the times when it is switched on
but running under no load can be taken into
account in the estimate.
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
19.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Number of Number of
teeth, spro‐ drive links
cket nose
9
English
measured according to
wA
Saw chain
44
50 3/8" PS3
55
44
50 3/8" PS
55
44
50 3/8" PM3
55
44
50 3/8" PD3
55
53