Marking; General Warnings And Precautions - Interacoustics AC40 Gebrauchsanweisung

AC40 Instructions for Use - US

2.2 Marking

The following marking can be found on the instrument:
Symbol
0123

2.3 General Warnings and Precautions

External equipment intended for connection to signal input, signal output or other connectors shall comply
with relevant IEC standard (e.g. IEC 60950 for IT equipment). In these situations an optical isolator is
recommended to fulfill the requirements. Equipment not complying with IEC 60601-1 shall be kept outside
the patient environment, as defined in the standard (usually 1.5 meter). If in doubt, contact qualified medical
technician or your local representative.
This instrument does not incorporate any separation devices at connections for PCs, printers, active
speakers etc. (Medical Electrical System).
Explanation
Type B applied parts.
Patient applied parts that are not conductive and can be immediately
released from the patient.
Refer to instruction manual
WEEE (EU-directive)
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
The CE-mark indicates that Interacoustics A/S meets the requirements of
Annex II of the Medical Device Directive 93/42/EEC. TÜV Product Service,
Identification No. 0123, has approved the quality system.
Year of manufacture
Do not re-use
Parts like ear-tips and similar are for single use only
Display Port Connection – HDMI type
Page 6