MSW -FI-7500 Bedienungsanleitung Seite 255

Specification of high-performance vector convertor
output frequency Hz
Frequency arrival detection width
P8-21
Operating frequency of the inverter, and is in the target frequency range, the inverter output multifunction DO ON signal.
This parameter is used to set the frequency arrival detection range, the parameter is a percentage of the maximum frequency.
Figure 6-17 is a schematic diagram of a frequency to reach.
FDT level
Frequency to
detect signal
(DO, relay)
Figure 6-16 FDT level schematic
Setting range
ON
Factory default
0.0% to 100% (maximum frequency)
- 110 -
Parameter description
FDT lag value
=P8-19 X P8-20
time
time
0.0%