Ke310 Control Signals - Bosch Rexroth KE310 Bedienungsanleitung

22/64 Bosch Rexroth AG | Electric Drives and Controls

6 KE310 Control Signals

6 KE310 Control Signals
6.1 Tightening cell
A tightening cell is defined as the installed
hardware for at least one tightening channel
and at least one data interface for communi-
cation with the operating or evaluation pro-
gram or the superior controller. This includes
the corresponding tightening programs and
tightening applications.
A tightening channel is controlled by an
SE311/312/SEH312 tightening controller.
The KE310 and SE311/312/SEH312 com-
municate with each other via an internal bus
system.
6.2 Control signals
The tightening cell communicates with the
superior controller via control signals. A PLC
assignment table determines which control
signals are assigned to the inputs/outputs.
The inputs/outputs are assigned in the
BS300 operating program.
For more information, refer to:
– the online guide in the operating program
(programming the assignment table),
– the system documentation, chapter 5
"Control signals" (3 609 929 918) (signal
description, sequence examples, and
chronological sequences).
KE310 | 3 609 929 986/1.0