Operation; Connection Diagram; Notes On Control Unit Diagnosis; Esi[Tronic] 2.0 Update - Bosch KTS Truck Originalbetriebsanleitung

en | 16 | KTS Truck |
3.5

Operation

KTS Truck must be connected to a PC/Laptop by way
of Bluetooth or the USB interface.
!
Do not subject the Bluetooth USB adapter
connected to the laptop to mechanical strain or use
it as a handle, as this could damage the Laptop or
Bluetooth USB adapter.
i
The Bluetooth connection between KTS Truck
and the PC/Laptop can be established using the
Bluetooth USB adapter included in the scope of
delivery (for PC/Laptop without internal Bluetooth
hardware).
i
For information on Bluetooth and Bluetooth
symbol, see online help for ESI[tronic] 2.0 by
selecting .
3.5.1

Connection diagram

1
1
9
2
10
3
11
12 4
13 5
14
6
15
7
16
8
11
DCU 130
10
8
7
9
Fig. 3: Connection diagram KTS Truck
1 Connecting tip from universal connection set
2 OBD interface in vehicle
3 Vehicle-specific adapter cable (special accessory)
4 OBD diagnostic cable
5 Universal adapter cable
6 PC/laptop (e. g DCU 220)
7 KTS Truck
8 Adapter cable with battery clips (with fuse 3 AT)
9 Connection cable for cigarette lighter socket (with fuse 3 AT)
10 USB connection cable
11 Bluetooth USB adapter (only needed for PC/Laptop without
internal Bluetooth hardware)
|
1 689 989 100 2022-01-04
2
4
5
3
6
Powered by ESI[tronic]
!
Under no circumstances can the KTS Truck be
connected to a laptop via the USB connecting
cable if a power supply unit is connected via the
cigarette lighter socket of a vehicle and the laptop
is powered via this power supply unit. This can
damage the KTS Truck. In this case, communication
between the laptop and KTS Truck must be
established via Bluetooth.
3.5.2

Notes on control unit diagnosis

KTS Truck is supplied with power by way of either
the adapter cable with battery clips provided, the
connecting cable for the cigarette lighter socket or the
OBD interface in the vehicle.
i
On some vehicles, the ignition must be switched on
for power to be supplied via the OBD interface.
Connection to the diagnostic connector in the vehicle
is made by using one of the following options:
R
The OBD diagnostic cable (fig.3, item 4)
R
OBD diagnostic cable together with vehicle-specific
adapter cable (fig. 3, item 3) (special accessory)
R
Universal adapter cable (fig. 3, item 5).
!
Make sure the OBD connection cable is properly
connected to the KTS Truck. Incorrect connection
could cause the pins of the plug to bend or break
off. Only use the OBD diagnostic cable contained
in the scope of delivery!
i
For further information on control unit diagnosis,
see ESI[tronic] 2.0 online help by selecting
3.5.3

ESI[tronic] 2.0 update

Updates are download and installed using the
Diagnostic Download Manager (DDM).
i
For further information, see DDM Help Center by
selecting "?".
i
The data (e.g. licensing, user settings, vehicles
selected) are not deleted when updating.
.
Robert Bosch GmbH