Initial Operation; Complaints And Repairs; Guarantee; Service - Bosch Rexroth SMeth 3 609 929 727 Bedienungsanleitung

10/28 Bosch Rexroth AG | Electric Drives and Controls

5 Initial Operation

5 Initial Operation
Before commissioning, the proper seat of all
jumpers must be ensured.
5.1 Interface X 6.2
The interface is designed as an 8-pin RJ45
socket.
Figure 1: RJ45 socket, 8-pin (female)
Pin Signal Description/Function
1 Transmit + Ethernet Transmitting cable
2 Transmit – Ethernet Transmitting cable
3 Receive + Ethernet Receiving cable
4 NC
5 NC
6 Receive – Ethernet Receiving cable
7 NC
8 NC
Table 2:
6

Complaints and repairs

For complaints and repairs that require disas-
sembly, please send the interface module
fully assembled to the supplier or our custo-
mer service workshop in Murrhardt, Germa-
ny. Complaints and repairs cannot be
acknowledged if this procedure is not follo-
wed.
SMeth | 3 609 929 727/1.2
7

Guarantee

We grant a 1-year-warranty for Rexroth ma-
chines (invoice or delivery note serves as
proof).
Damage caused by normal wear and tear,
overload, or improper handling are excluded
from the guarantee.
8

Service

Bosch Rexroth AG
Competence Center Murrhardt
Service Schraub- und Einpress-Systeme
Fornsbacherstr. 92
71540 Murrhardt, Germany
Tel.: +49 (0)7192 22 231
Fax: +49 (0)7192 22 164
brssvc7.abteilung@boschrexroth.de
9

Sales

Bosch Rexroth AG
Electric Drives and Controls
Schraub- und Einpress-Systeme
Postfach 1161
71534 Murrhardt, Germany
Fax +49 (0)71 92 22-1 81
schraubtechnik@boschrexroth.de
http://www.boschrexroth.com/schraubtechnik