Breville Barista Max+ VCF152X Bedienungsanleitung Seite 39

TROUBLESHOOTING GUIDE - GRINDER
Problem
Espresso is
under extracted
even with a fine
coffee grind
Grind Setting
cannot be
adjusted
Bean Hopper
cannot be
locked into
position
Top Burr does
not sit in the
Grinder Collar
correctly
VCF152X_VCF153X_21MLM1 (EMEA).indd 39 VCF152X_VCF153X_21MLM1 (EMEA).indd 39
Possible Cause
Not enough coffee grinds
used.
Beans are too old.
The Bean Hopper is not
seated correctly.
Coffee beans or grinds are
caught around the Top Burr
or Grinder Collar.
Grinder Collar not aligned
to the Top Cover.
Coffee beans or grinds are
caught in the Top Burr or
Grinder Collar.
The Top Burr is not seated
correctly.
Grinder Collar not aligned
to the Top Cover.
Coffee beans or grinds are
caught around & under the
Top Burr
The Top Burr is not seated
correctly.
What To Do
Fill with more coffee grinds.
Use freshly roasted beans. Old coffee
beans, no matter the Grind Setting, will
have a fast extraction and will produce
an under extracted tasting espresso.
Remove the Bean Hopper & replace.
See Replace Bean Hopper section,
page 27.
Remove the Bean Hopper & Top Burr.
Use the Cleaning Brush or Vacuum
Cleaner as necessary to clear loose
coffee beans or grinds. See Replace
Bean Hopper section, page 28.
Ensure the dot on the Top Cover aligns
with the dot on the Grinder Collar. See
Replace Top Burr section, page 30.
Remove the Bean Hopper & Top Burr.
Use the Cleaning Brush or Vacuum
Cleaner as necessary to clear loose
coffee beans or grinds. See Replace
Bean Hopper section, page 28.
Make sure the Top Burr is correctly
aligned and that the two handles are
placed one on each side. See Replace
Top Burr section, page 30.
Ensure the dot on the Top Cover aligns
with the dot on the Grinder Collar. See
Replace Top Burr section, page 30.
Remove the Top Burr and replace
the Bean Hopper. Hold the Bean
Hopper down with your hand, do not
turn. Insert the Group Handle into the
Grinding Cradle and push down to
activate the Grinder. The coffee grinds
will fall out the Grind Outlet.
Make sure the Top Burr is correctly
aligned and that the two handles are
placed one on each side. See Replace
Top Burr section, page 30.
39
5/14/21 15:52 5/14/21 15:52