MULTIFUNCTION ELECTRODE PADS INSTRUCTIONS FOR USE
Product Introduction
Intended Use
MR60/MR62 multifunction electrode pads are pre-gelled, self adhesive
electrodes intended for ECG monitoring, noninvasive pacing, automated ex-
ternal defibrillation, manual defibrillation and synchronized cardioversion for
adult patients.
This product must only be used by trained clinical professionals and with
Mindray-specified defibrillator/monitor. The operator shall be liable for
understanding this instructions for use or consulting with us to confirm the
compatibility of this product and the defibrillator/monitor. Otherwise, product
performance may be compromised or personal injury may occur.
Warnings
Do not crush, bend or fold the pads, or place them under heavy objects.
Check expiration date on package. Do not use if beyond the expiration
date.
Check pads package for integrity before use. Remove from use if there is
sign of damage.
Do not open pads package until immediately prior to use.
Check the pads before use. Remove them from use in case of damage,
deterioration or visible contamination.
Do not use if gel is dry or separated from the metal backing.
Do not use additional conductive gel and paste on pads.
Do not apply pads over broken skin, if possible.
Keep pads clear of any other electrodes or metal parts in contact with the
patient during defibrillation.
Check patient skin at application site every 30 minutes of continuous pac-
ing. Replace pads after continuous pacing for 8 hours.
2