Storage And Transport - EKOM DK50-10 Serie Benutzerhandbuch

DK50-10

STORAGE AND TRANSPORT

The compressor is shipped from the factory in a transport packaging. This protects the device from
damage during transport.
The original compressor packaging must be used for transport whenever possible.
Transport the compressor in an upright position, always secured with transport
fixation.
Protect the compressor from moisture, dirt and extreme temperatures during transport and
storage. Store the compressor in its original packaging in a warm, dry, and dust-free area.
Do not store near any chemical substances.
Keep the packaging material, if possible. If not, please dispose of the packaging material in
an environmentally-friendly way. Packaging cardboard can be recycled with old paper.
The compressor may only be transported when all air pressure has been vented.
Before moving or transporting the compressor, release all air pressure from the tank
and hoses and drain condensate from the air tank.
Storing or shipping the equipment in any conditions other than those specified below
is prohibited.
Ambient conditions for storage and transport
Products may only be stored and transported in vehicles that are free of any traces of volatile
chemicals under the following conditions:
Temperature
Relative humidity
07/2021
–25°C to +55°C, 24 h at up to +70°C
max. 90% (non-condensing)
- 9 - NP-DK50-10-15_07-2021-MD