Ambu aBox Duodeno Bedienungsanleitung Seite 20

Irregularity
Description
Control panel
does not work
Endoscopic image
is too dark
Endoscopic image is
too bright
Color tone of the
endoscopic image
is unusual
Endoscopic image
remains frozen
Image cannot
be stored
20
Possible Cause
aBox™ Duodeno
not powered ON
Sterile water bottle
not confirmed
aScope™ Duodeno
not connected
LEDs are not switched ON
Image settings of the aBox™
Duodeno are incorrect
(brightness and contrast)
Medical grade monitor
settings are improper
(brightness and contrast)
LEDs are running in reduced
power mode
Image settings of the aBox™
Duodeno are incorrect
(brightness and contrast)
Monitor settings are improper
(brightness and contrast)
Medical grade monitor
settings are improper
Monitor cable is
connected incorrectly
Medical grade monitor cable
is defect
Freeze button is still set
No video recorder connected
Solution
Power the aBox™ Duodeno ON
Confirm the message on the
settings and information menu
that a new bottle of sterile water
was connected
Connect the aScope™ Duodeno
Switch the LEDs on as described in
section 5
Set the image settings correct as
described in section 5.4
Set a proper brightness
as described in the medical grade
monitor's instruction manual.
Check the sterile water bottle and
connect a new bottle of sterile
water if necessary or check if the
process water tubing is sufficiently
inserted in the sterile water bottle
Check the suction system for
proper functionality. See section
12. Troubleshooting in the
aScope™ Duodeno IFU
Set the image settings correct as
described in section 5.4
Set a proper brightness or
contrast as described in the
monitor's instruction manual
Adjust the color setting at the
monitor according its IFU, starting
from standard color setting (D65)
Connect the monitor cable
properly as described in Section 5
Connect a new power cable to the
medical grade monitor
Press the freeze button to restore
the real-time image
Connect a video recorder