Preparing The Door And Upper Hinge For Repositioning; Replacing The Hinges And Door - hanseatic HGS14355ENFW Gebrauchsanleitung

Preparing the door and upper
hinge for repositioning
(17)
(22)
(23)
1. Using pliers, loosen the nut (22) on the
upper hinge (17), unscrew the hinge
bolt (23) of the upper hinge (17) and
screw it back in on the other side of the
hinge plate.
2. Transfer the door handle (2) to the oppo-
site side, as described in the section "In-
stalling the door handle" on page EN-24.
Replacing the hinges and
door
(20)
1. Reinsert the lower hinge (20) and the
screw foot (4) into the new position.
2. Replace the appliance door (3) and close
it.
Changing the door hinges
3. Replace the upper hinge (17) and screw it
4. Put on the protective cover (24).
5. Put the cover (19) on the opposite side.
You have now reversed the door on your ap-
pliance.
(4)
(18) 8 8
(17)
tight using the screws (18) provided.
Check whether the doors are easy to open
and close.
(24)
Page EN-27
(19)