Preparing The Doors And Hinges For Repositioning - hanseatic HKGK18560NFEIWD Gebrauchsanleitung

Page EN-28 Changing the door hinges
9. Tilt the unit slightly backwards against a
wall so that the lower hinge (29) is ac-
cessible.
10. Remove the screw feet (6) on both
sides.
11. Unscrew the hinge (29).
Preparing the doors and
hinges for repositioning
(30)
(29)
1. Reposition the hinge pin (30) belonging
to the hinge (29) as displayed above.
(31)
(29)
2. Move the screw (31) to the opposite
side.
3. Replace the lower hinge (29) by screw-
(29)
(6)
4. Using a flat-tip screwdriver, turn the two
5. Then reposition the dummy plugs (32)
6. Reposition the two dummy plugs (33)
ing it onto the opposite side. Replace the
screw feet (6).
(32)
dummy plugs (32) until the slits are in a
vertical position, at which point they can
be removed.
on the opposite side, and turn them us-
ing a flat-tip screwdriver until the slits are
in a horizontal position.
(33)
on the upper-facing side of the freezer
door (28) on the opposite side.